APACHE POINT OBSERVATORY SDSS 2.5M OBSERVING LOG Wednesday October 15, 2008 (MJD 54755) ---=== OBSERVING TEAM ===--- Dan Oravetz Nathan De Lee ---=== OBSERVING PLAN ===--- MARVELS Science! ---=== OBSERVING SUMMARY ===--- The night was lost to high humidity. ---=== OBSERVING LOG ===--- Afternoon: --------- All systems checked and working properly. sdsshost2.apo.nmsu.edu % df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 142G 115G 21G 86% / /dev/sda1 99M 30M 64M 33% /boot /dev/sdb1 917G 795G 76G 92% /data sdssfiles1p:/data1/data 1.5T 946G 448G 68% /files When I tried loading one of the plugMapM files for cartridge 4, 3027 for the spectro collimation check, I received the following error: Error: /astrolog/54755/cartridgeReload-54755-expected integer but got "3027B" Steph showed me how to fix this error by vi-ing the plugMapM file that's at fault and then removing the `B' from the `plateId' field in the plugMapM file. I put this procedure in detail in the Problems section for a reference on how to deal with this error. Spectro collimation set for ~5C. No adjustments made. 00:05Z - Began ventilation. Doors and louvers opened, fans on. Night: ----- 00:34Z - Sunset. 00:40Z - Dewpoint depression dropped to ~2.4C according to the 3.5m air readings. The 2.5m dewpoint reading was stuck at -0.3C, so Jon ran it through a heating cycle and then it began reading values more consistent with what the 3.5m readings were. Closed the doors and louvers, turned the fans off. Cart. 4, 3027, marvels_pre201 ***************************** There were 2 sets of plugMapM files created today (54755) for this plate: *01.par, *01B.par, *02.par, and *02B.par (see below). sp1> loadCart -query 4 3027 /linuxp/prd/iop/v4_39_0/params/cartridgeInfo.par Please choose one of the plugmap files below (-1 to escape) Choice Filename 0 /data/spectro/plugMapM/plPlugMapM-3027-54717-01.par 1 /data/spectro/plugMapM/plPlugMapM-3027-54717-01B.par 2 /data/spectro/plugMapM/plPlugMapM-3027-54755-01.par 3 /data/spectro/plugMapM/plPlugMapM-3027-54755-01B.par 4 /data/spectro/plugMapM/plPlugMapM-3027-54755-02.par 5 /data/spectro/plugMapM/plPlugMapM-3027-54755-02B.par Steph had a look and found no obvious differences between the *01*.par set and the *02*.par set, so we will go with the *02*.par set since it was created most recently. 01:52Z - End twilight. 11:20Z - Humidity still too high, we called it. 11:25Z - endNight rejoiced, but failed to copy cloudcam images. ---=== IMAGING RUN SUMMARY ===--- Run Time Stripe Lambda Last Flavor Comments Start End Begin End Frame ------------------------------------------------------------------------- 7736 23:20Z 23:54Z 100 O 84.01 92.62 72 ignore ---=== IMAGING RUN DETAILS ===--- ---=== SKIPPY RESULTS ===--- Run Frame nFrames stars muErr muRms nuErr nuRms rot az el --------------------------------------------------------------------------- ---=== LTMATCH RESULTS ===--- Run Field nFields alt az nGood rowMean rowSig colMean colSig rot ------------------------------------------------------------------------ ---=== SPECTROSCOPY DATA SUMMARY ===--- Summary Checked (y/n): y QA Procedures Done (y/n): n UT Exp Time flavor comment (S/N)^2 totals ========================================== b1 r1 b2 r2 ----- sequence 55503, plate -9999 ------- 23:22 55503 0.0 bias 23:41 55504 0.0 bias ----- sequence 55505, plate 3027 ------- 00:05 55505 10.0 flat 00:08 55506 2.0 arc 00:11 55507 3.0 arc 00:14 55508 3.0 arc ---=== TELESCOPE OFFSETS AND SCALE I ===--- Time Instrument Az Alt Rot Scale pos offset pos offset pos offset ------------------------------------------------------------------------------ ---=== TELESCOPE OFFSETS AND SCALE II ===--- ---=== FOCUS LOG ===--- setmir piston Temp Wind Time Inst scale M1 M2 Foc Az Alt (C) MPH Dir filt fwhm ------------------------------------------------------------------------------ ---=== WEATHER LOG ===--- Wind Time Temp F Dewp F MPH Direction Dust DIMM Sky 23:11Z 48 39 4 257 (WSW) 1424 - clear 23:43Z 46 38 2 198 (SSW) 1442 - clear 00:15Z 43 36 0 239 (WSW) 1451 - clear 00:47Z 39 35 11 80 (E) 485 - clear 01:19Z 38 34 13 78 (ENE) 720 - clear 01:51Z 37 34 15 67 (ENE) 895 - clear 02:23Z 36 34 16 65 (ENE) 987 - clear 02:56Z 35 34 15 69 (ENE) 832 - clear 03:28Z 34 34 13 73 (ENE) 701 - clear 04:00Z 35 33 14 66 (ENE) 745 - clear 04:32Z 35 31 16 76 (ENE) 903 - clear 05:04Z 33 32 15 66 (ENE) 707 - clear 05:36Z 34 29 13 76 (ENE) 747 - clear 06:08Z 34 28 10 81 (E) 720 - clear 06:38Z 32 30 11 70 (ENE) 560 - clear 07:09Z 34 29 8 79 (E) 693 - clear 07:39Z 35 30 2 77 (ENE) 730 - clear 08:09Z 36 30 0 287 (WNW) 819 - clear 08:39Z 38 36 1 244 (WSW) 1926 - clear 09:09Z 38 35 1 254 (WSW) 1884 - clear 09:40Z 37 35 4 349 (NNW) 1619 - clear 10:12Z 37 34 1 305 (NW) 1465 - clear 10:44Z 38 31 0 240 (WSW) 1326 - clear 11:16Z 37 25 4 189 (S) 1407 - clear ---=== TELESCOPE STATUS ===--- 00:05Z - Began ventilation. Doors and louvers opened, fans on. 00:40Z - Closed the doors and louvers, turned the fans off. No interlocks bypassed. Status at: 11:22Z Telescope stowed at: 30,121,00 mount Instrument mounted: Cartridge 4 Counterweights at: 252 lbs LN2 autofill systems: Connected and turned on. 180L LN2 dewar scales: Spectro 290.80 lbs, 17.34 psi Imager 198.00 lbs, 19.08 psi ---=== SOFTWARE USED ===--- IOP/SOP: v4_39_0 Watcher: v2_36_0 MCP: v6_4_0 TPM: tpm_v3_5_0 AstroDa: v15_13_1 TCC: TCC 2.7.2.1 August 6 2004 sdssProcedures: v2_42 SoS: v5_1_8 plate-mapper: v4_3_1 ---=== MIRROR NUMBERS ===--- PRIMARY: -------- Scale: 1.000000 MIGS TONIGHT NOMINAL Axial A -0.0300 -0.0300 Axial B 0.0360 0.0390 Axial C -0.0380 -0.0400 Trans D -0.7620 -0.7570 Lateral E 10.5791 10.5537 Lateral F 12.1666 12.1539 GALILS Commanded: 32150. 21600. 27450. 8600. 10400. 10050. Actual: 32163. 21616. 27446. 8616. 10414. 10072. SETMIR VALUES PriDesOrient: -1382.00 -11.72 8.60 496.70 640.50 PriOrient: -1381.46 -11.65 8.77 495.93 639.59 SECONDARY: ---------- Focus: 0.00 Air Temp.: 7.0 Alt.: 6.039966 True altitude was 30 degrees when mirror numbers were taken. MIGS TONIGHT NOMINAL Axial A 18.5650 18.5620 Axial B 15.6120 15.6080 Axial C 13.8190 13.8170 Trans D 15.1070 15.1170 GALILS Commanded: 222116. 126066. 194192. -3050. -4650. Actual: 222790. 124972. 191747. -3066. -4636. SETMIR VALUES SecDesOrient: 142.70 -12.00 -28.00 -39.00 94.77 SecOrient: 143.46 -12.67 -27.32 -38.21 95.20 ---=== PROBLEMS IN DETAIL ===--- IDL 5.5a> apo_plotbias, 55504 Filename 02% 05% 10% 50% 90% 95% 98% ------------------- ------ ------ ------ ------ ------ ------ ------ sdR-b1-00055504.fit -5.9 -4.5 -2.6 1.8 7.3 8.4 10.6 sdR-b2-00055504.fit -8.0 -6.6 -4.3 1.0 6.8 8.6 10.5 sdR-r1-00055504.fit -7.0 -5.6 -4.0 1.0 6.4 8.5 10.0 sdR-r2-00055504.fit -8.3 -6.2 -4.5 0.8 6.4 8.5 10.6 Spectro collimation with cart. 4 -------------------------------- IDL 5.5a> collimate, 55507 Reading /data/spectro/54755/sdR-b1-00055507.fit Reading /data/spectro/54755/sdR-b1-00055508.fit COLLIMATE: Min offset = -0.64 pix COLLIMATE: Max offset = 0.94 pix COLLIMATE: RMS across CCD = 0.35 pix COLLIMATE: Mean offset = 0.18 pix COLLIMATE: Camera b1 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -6.4 degrees for spectro-1 COLLIMATE: (if red is already in focus) Log file = Collimate-54755-b1-00055507.log PostScript file = Collimate-54755-b1-00055507.ps Reading /data/spectro/54755/sdR-b2-00055507.fit Reading /data/spectro/54755/sdR-b2-00055508.fit COLLIMATE: Min offset = 0.02 pix COLLIMATE: Max offset = 0.51 pix COLLIMATE: RMS across CCD = 0.13 pix COLLIMATE: Mean offset = 0.25 pix COLLIMATE: Camera b2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict blue camera ring movement of -8.8 degrees for spectro-2 COLLIMATE: (if red is already in focus) Log file = Collimate-54755-b2-00055507.log PostScript file = Collimate-54755-b2-00055507.ps Reading /data/spectro/54755/sdR-r1-00055507.fit Reading /data/spectro/54755/sdR-r1-00055508.fit COLLIMATE: Min offset = -0.77 pix COLLIMATE: Max offset = 0.31 pix COLLIMATE: RMS across CCD = 0.30 pix COLLIMATE: Mean offset = -0.26 pix COLLIMATE: Camera r1 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict (red) piston movement of 2387 steps for spectro-1 COLLIMATE: Issue SOP command: "sp1; mechPiston 2387" Log file = Collimate-54755-r1-00055507.log PostScript file = Collimate-54755-r1-00055507.ps Reading /data/spectro/54755/sdR-r2-00055507.fit Reading /data/spectro/54755/sdR-r2-00055508.fit COLLIMATE: Min offset = -1.08 pix COLLIMATE: Max offset = -0.06 pix COLLIMATE: RMS across CCD = 0.30 pix COLLIMATE: Mean offset = -0.40 pix COLLIMATE: Camera r2 appears to be OUT-OF-FOCUS (|mean| > 0.15 pix) COLLIMATE: Predict (red) piston movement of 3632 steps for spectro-2 COLLIMATE: Issue SOP command: "sp2; mechPiston 3632" Log file = Collimate-54755-r2-00055507.log PostScript file = Collimate-54755-r2-00055507.ps % Program caused arithmetic error: Floating illegal operand plugMapM load error ------------------- Here's how to deal with this error: Error: /astrolog/54755/cartridgeReload-54755-expected integer but got "3027B" sp1> loadCart -query 4 3027 /linuxp/prd/iop/v4_39_0/params/cartridgeInfo.par Please choose one of the plugmap files below (-1 to escape) Choice Filename 0 /data/spectro/plugMapM/plPlugMapM-3027-54717-01.par 1 /data/spectro/plugMapM/plPlugMapM-3027-54717-01B.par 2 /data/spectro/plugMapM/plPlugMapM-3027-54755-01.par 3 /data/spectro/plugMapM/plPlugMapM-3027-54755-01B.par 4 /data/spectro/plugMapM/plPlugMapM-3027-54755-02.par 5 /data/spectro/plugMapM/plPlugMapM-3027-54755-02B.par 5 Reading /data/spectro/plugMapM/plPlugMapM-3027-54755-02B.par Taking absolute values of GUIDE fiberId Taking absolute values of ALIGNMENT fiberId Coordinates are 296.12100000 43.52900000 Error: /astrolog/54755/cartridgeReload-54755-expected integer but got "3027B" [doravetz@sdsshost2 plugMapM]$ cd /data/spectro/plugMapM/ [doravetz@sdsshost2 plugMapM]$ ls *3027* fiberScan-3027-54717-01.par plPlugMapM-3027-54755-02B.par fiberScan-3027-54755-01.par plPlugMapM-3027-54755-02.log fiberScan-3027-54755-02.par plPlugMapM-3027-54755-02.par plPlugMapM-3027-54717-01B.par plSlitpos-3027-54717-01.par plPlugMapM-3027-54717-01.log plSlitpos-3027-54755-01.par plPlugMapM-3027-54717-01.par plSlitpos-3027-54755-02.par plPlugMapM-3027-54755-01B.par Unplugged-3027-54717-01.ps plPlugMapM-3027-54755-01.log Unplugged-3027-54755-01.ps plPlugMapM-3027-54755-01.par Unplugged-3027-54755-02.ps [doravetz@sdsshost2 plugMapM]$ vi plPlugMapM-3027-54755-02B.par completeTileVersion none reddeningMed 0.5643 0.4152 0.3011 0.2283 0.1619 # tileId is set to designid for SDSS-III plates tileId 22 raCen 296.12100000 decCen 43.52900000 platedesign_version trunk plateId 3027B temp 10.0000 haMin 19.0000 haMax 19.0000 mjdDesign 54630 pointing B mag_quality bad theta 0 plateid 3027 ha 15.000 19.000 0.000 0.000 0.000 0.000 temp 10.000 instruments SDSS targettypes science sky standard npointings 2 noffsets 0 nsdss_science 304 304 nsdss_sky 0 0 nsdss_standard 16 16 minstdinblocksdss 0 minskyinblocksdss 0 pointingexptime1 300. pointingexptime2 300. guidetype 2MASS 2MASS guidenums1 1 3 5 7 9 10 guidenums2 2 4 6 8 11 ferrulesizesdss 3.175 buffersizesdss 0.076 ferrulesizeguide 6.9555 There is a lot more to this file, but this portion includes the field I had to fix in order to get a proper load. Notice how the `plateId' field says `3027B' and the `plateid' field says `3027'. I edited `plateId' so it became `3027' (deleted the `B') and then you have to force the save since this is a read-only file with `:w!' (colon w ! and then return). Then this plugMapM file loaded just fine.